View 114001505-0000_4573524.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

4 - 2 pcb keyswitches 4 pcb keyswitches product survey racon 8 versions 12 mm recommended key grid 5.0 mm (variable plunger) overall height gold contacts non-illuminated illumination keyswitch signal indicator 4 - 6 page racon 12 15.24 mm 5.0 mm (variable plunger) gold non-illuminated 4 - 10 racon 12 v 5.0 mm (variabler plunger) gold non-illuminated 4 - 14 racon 12 i 15.24 mm 9.7 mm gold fully illuminated 4 - 16 rf 15 19.05 mm fully illuminated 9.7 mm or 12.5 mm (with keycap) gold or silver non- illumi- nated 4 - 26 rf 15 n (nieder) 19.05 mm 6.2 mm 9.7 mm 12.5 mm 22.5 mm (var. plunger) gold or silver non- illumi- nated 4 - 32 rf 15 r (rund) 15.24 mm 9.7 mm or 12.5 mm gold or silver non- illumi- nated 4 - 36 rf 15 h (hoch) 20 mm fully/spot illuminated illumination by separate/ integrated led (depending on overall height) spot illuminated fully illuminated 12.5 mm gold or silver non- illumi- nated 4 - 42 rf 19 23 mm fully illuminated 9.7 mm gold or silver non- illumi- nated 4 - 50 rf 19, 1 ? + 1 s 23 mm 9.7 mm gold or silver non-illuminated 4 - 56 fully/spot illuminated
pcb keyswitches 4 - 3 4 pcb keyswitches versions recommended key grid overall height contacts illumination keyswitch signal indicator page main switch kn19 19.05 x 38.1 mm spot illuminated with 1 led 9.7 mm silver non- illumi- nated 4 - 75 rk 90 system 12.50 mm depending on the type of keyswitch used: e racon (without plunger) e rf 15/rf 15 n e rf 19 e kn 19 4 - 79 rg 85 iii system 35/55 mm fully illuminated 14 mm silver edge-illuminated and symbol illumination 4 - 95 full-travael keyswitch rs 76 19.05 mm 15.5/15.9 mm (with key caps) rs 76 m: gold rs 76 c: contactless non- illumi- nated fully/spot illuminated 4 - 115 keyswitches for conductor board 19.05 mm 19.5 mm (without key) gold non-illuminated 4 - 143 rf 19 h (high profile) 24 mm 12.5 mm gold or silver 4 - 60 fully illuminated
4 - 4 pcb keyswitches 4 pcb keyswitches ce-conformity the products of the chapter pcb keyswitches can C relating to the ce-conformity according to the low- voltage directive 73/23/ewg C be divided into the following groups: all products with an operating voltage u b > 50 v f. ex. short-travel main switch kn 19, for this product the low-voltage directive 73/23/ewg applies. all products with an operating volltage u b < 50 v f. ex. racon, rf 15, rs 76, for these components no directive applies. single parts, accessories and illumination no directive applies for these products. emc-law the components of this catalogue are within the meaning of the law concerning the electromagnetic conformity (= emc-law) basic components as, for ex., switches, signal lamps or like and, therefore, do not fall within the scope of the emc-law. declarations of conformity declarations of conformity for all concerned products are available and can be delivered upon request. please always state the exact order reference of the respective product. marking the marking will be corresponding to the low-voltage directive 73/23/ewg resp. the directive ce-marking 93/68/ewg either on the packing or on the product itself or on the shipping documents. ul-approval for racon 8/12, kn 19 and short-travel keyswitches rf 15/19 the short-travel main switch kn 19 and data entry systems wich are built with rafi short-travel switches according to our design proposals meet the requirements of the ul approbals for the american market. ul file no. for kn 19: e 116362 ul file no. for data entry systems: e 202520 examples for applications standards rf 15 rg 85 iii system rf 15 with rk 90 system
stock items are marked by bold printed order numbers. racon short-travel keyswitches pcb keyswitches 4 - 5 4 racon general data racon short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. for use under an overlay or with rk 90 keycaps. print and smd versions available (suitable for automatic assembly). content racon 8 4 - 6 racon 8, solder terminals for pcb, outward 4 - 8 racon 8, solder terminals for pcb, inward 4 - 9 racon 8, smd gullwing (z) terminals 4 - 9 racon 12 4 - 10 racon 12, solder terminals for pcb, outward 4 - 12 racon 12, solder terminals for pcb, inward 4 - 13 racon 12, smd gullwing (z) terminals 4 - 13 racon 12 vwith vertical adapter 4 - 14 racon 12 v with vertical adapter 4 - 15 racon 12 i 4 - 16 racon 12 i, solder terminals for pcb 4 - 18 racon special accessories 4 - 20 plunger for membrane data entry system 4 - 20 square plunger for membrane data entry system 4 - 21
stock items are marked by bold printed order numbers. racon short-travel keyswitches 4 - 6 pcb keyswitches 4 racon racon 8 technical data dimensions recommended key grid see order block key grid max. see order block length of housing 8.4 mm width of housing 8.4 mm overall height 5.00 mm mechanical design mounting soldering terminals see order block contact system snap-action contact contact arrangement 1 no contact materials au illumination no mechanical characteristics operating force 3.3 +/-0.6 n switching travel 0.34 +/-0.1 mm robustness min. 100 n electrical characteristics rated voltage min. 0.02 v rated voltage max. 42 v rated current min. 0.01 ma rated current max. 100 ma rated power max. (ohmic load) 1 w contact resistance when new max. 100 m insulation resistance 10 9 bouncing time max. 5 ms other specifications ambient temp. operating min. -40 c ambient temp. operating max. +80 c resistance to constant environment according to iec 600 68-2-3 and 2-30 resistance at variable environment according to iec 600 68-2-14 and 2-33 operating life at r t = 23 c and test force = 1,5 x rated force 1000000 solderability / solder heat resistance pcb version din iec 600 68-2-20 solderability / solder heat resistance smd version en 61760-1 and din iec 600-68-2-58 flammability of materials ul 94 hb packing see order block produkt code see order block general data racon short-travel keyswitches offer an extremely high switching reliability while needing very little space. they can be arranged as single keys, in rows or key blocks. when arranged under an overlay, racon keyswitches should be combined with plungers. the features at a glance: ? suitable for the most common soldering methods - wave soldering bath for print versions - reflow soldering (smd) - manual soldering ? smd version suitable for processing with an automatic smd assembly machine
racon short-travel keyswitches pcb keyswitches 4 - 7 4 racon ? 9.00 3 figured plunger ? 8.00 min. 4.50 min. 12.00 1 2 min. 6.50 0.15 0.50 metal web min. 3.00 4.50 12.00 6.35 12.00 1. 0 0 switching symbols acc. to iec 617 form x (twice interrupting) explanation ? overall height = racon + plunger ? recommended area embossing 0.35 mm at glue spacer thickness of 0.15 mm ? front panel cut out = plunger diameter + 1 mm solder terminal for pcb, outward view on component side ? 9.00 min. 12.00 1 2 3 figured plunger ? 8.00 min. 6.50 5 0.15 0.50 in. 4.50 metal web min. 3.00 8.50 1.00 4.50 12.00 12.00 solder terminal for pcb, inward min. 12.70 1 3 2 figured plunger ? 8.00 0.50 metal web 3.70 (min. 3.00) ? 9.00 in. 4.50 min. 6.50 0.15 12.00 min. 7.60 max. 1.40 4.50 12.00 12.70 min. smd gullwing (z) terminal typical force/travel diagram racon 8 racon 8, typical system assembly with plunger under overlay racon 8, sdm-terminal, tape and reel drawing circuit diagram racon 8 view on component side view on component side footprint
stock items are marked by bold printed order numbers. 4 - 8 pcb keyswitches 4 racon racon short-travel keyswitches racon 8, solder terminals for pcb, outward 4.50 0.15 3.50 0.30 0.70 8.40 ? 3.50 5.00 0.10 terminals contact arrangement product code packing recommended key grid order no. solder terminal for pcb, outward 1 no a1 60 pieces per tube 12 x 12 mm 1.14.100.501/0000 technical data see page 4 - 6 description photo order no. page accessories racon 8 plunger for membrane data entry system 5.46.167.042/0209 4 - 20 plunger for membrane data entry system 5.46.167.090/0209 4 - 20 plunger for membrane data entry system 5.46.168.042/0209 4 - 20 plunger for membrane data entry system 5.46.169.042/0209 4 - 20 for other plungers, refer to the chapter ?racon special accessories; for keycaps, refer to the chapter ?rk 90.
stock items are marked by bold printed order numbers. pcb keyswitches 4 - 9 4 racon racon short-travel keyswitches racon 8, solder terminals for pcb, inward 8.40 ? 3.50 4.50 0.15 3.50 0.30 0.70 5.00 0.10 terminals contact arrangement product code packing recommended key grid order no. solder terminal for pcb, inward 1 no b1 60 pieces per tube 12 x 12 mm 1.14.100.502/0000 technical data see page 4 - 6 racon 8, smd gullwing (z) terminals 8.40 ? 3.50 4.50 ? 0.1 11.00 ? 0.15 0.7 0 5.11 ? 0.10 terminals contact arrangement product code packing recommended key grid order no. smd gullwing (z) terminals 1 no c1 1000 pieces tape and reel 12 x 12.7 mm 1.14.100.503/0000 technical data see page 4 - 6
stock items are marked by bold printed order numbers. 4 - 10 pcb keyswitches 4 racon racon short-travel keyswitches racon 12 technical data dimensions recommended key grid see order block key grid max. see order block length of housing 12 mm width of housing 12 mm overall height see order block mechanical design mounting soldering terminals see order block contact system snap-action contact contact arrangement 1 no contact materials au illumination no mechanical characteristics operating force 3.6 +/-0.7 n switching travel 0.61 +/-0.1 mm robustness min. 100 n electrical characteristics rated voltage min. 0.02 v rated voltage max. 42 v rated current min. 0.01 ma rated current max. 100 ma rated power max. (ohmic load) 1 w contact resistance when new max. 100 m ? insulation resistance 10 9 ? bouncing time max. 5 ms other specifications ambient temp. operating min. -40 c ambient temp. operating max. +80 c resistance to constant environment according to iec 600 68-2-3 and 2-30 resistance at variable environment according to iec 600 68-2-14 and 2-33 operating life at r t = 23 c and test force = 1,5 x rated force 1000000 solderability / solder heat resistance pcb version din iec 600 68-2-20 solderability / solder heat resistance smd version en 61760-1 and din iec 600-68-2-58 flammability of materials ul 94 hb packing see order block produkt code see order block general data racon short-travel keyswitches offer an extremely high switching reliability while needing very little space. they can be arranged as single keys, in rows or key blocks. when arranged under an overlay, racon keyswitches should be combined with plungers. the features at a glance: ? suitable for the most common soldering methods - wave soldering bath for print versions - reflow soldering (smd) - manual soldering ? smd version suitable for processing with an automatic smd assembly machine
racon short-travel keyswitches pcb keyswitches 4 - 11 4 racon ? 9.00 1 2 3 figured plunger ? 8.00 min. 7.00 0.15 min. 15.24 0.50 in. 4.50 metal web 6.24 (min. 3.00) 15.24 12.50 1.20 12.50 5.00 switching symbols acc. to iec 617 form x (twice interrupting) explanation 4 overall height = racon + plunger recommended area embossing 0.35 mm at glue spacer thickness of 0.15 mm - front panel cut out = plunger diameter + 1 mm solder terminal for pcb, outward 1.20 10.00 12.50 12.50 5.00 solder terminal for pcb, inward ? 9.0 0 min. 16.50 2 3 figured plu n ? 8.0 0 1 min. 7 . 00 0.1 5 0.50 in. 4.50 metal w eb 7 .50 (min. 3.00) 16.50 11.30 15.80 min. max. 1.60 min. 5.00 12.50 smd gullwing (z) terminal typical force/travel diagram racon 12 racon 12, typical system assembly with plunger under overlay circuit diagram racon 12 racon 12, smd-terminal, tape and reel drawing min. 7.00 view on component side view on component side view on component side footprint
stock items are marked by bold printed order numbers. 4 - 12 pcb keyswitches 4 racon racon short-travel keyswitches racon 12, solder terminals for pcb, outward 3.50 0.30 0.86 5.00 0.15 12.00 14.80 ? 3.50 5.00 0.10 terminals contact arrangement product code packing recommended key grid key grid max. order no. solder terminal for pcb, outward 1 no a1 45 pieces per tube 15.24 x 15.24 mm 12.5 x 15.24 mm 1.14.001.501/0000 technical data see page 4 - 10 description photo order no. page accessories racon 12 square plunger for membrane data entry system 5.46.001.057/0209 4 - 21 plunger for membrane data entry system 5.46.167.042/0209 4 - 20 plunger for membrane data entry system 5.46.167.090/0209 4 - 20 plunger for membrane data entry system 5.46.169.042/0209 4 - 20 for other plungers, refer to the chapter ?racon special accessories; for keycaps, refer to the chapter ?rk 90.
stock items are marked by bold printed order numbers. pcb keyswitches 4 - 13 4 racon racon short-travel keyswitches racon 12, solder terminals for pcb, inward 12.00 ? 3.50 5.00 0.15 5.00 0.10 0.86 3.50 0.30 1 4 .8 0 terminals contact arrangement product code packing recommended key grid key grid max. order no. solder terminal for pcb, inward 1 no b1 45 pieces per tube 15.24 x 15.24 mm 12.5 x 12.5 mm 1.14.001.502/0000 technical data see page 4 - 10 racon 12, smd gullwing (z) terminals 12.00 14.80 ? 3.50 15.00 ? 0.15 5.00 ? 0.15 5.11 ? 0.1 0.86 terminals contact arrangement product code packing recommended key grid key grid max. order no. smd gullwing (z) terminals 1 no c1 750 pieces tape and reel 15.24 x 16.5 mm 12.5 x 16.5 mm 1.14.001.503/0000 technical data see page 4 - 10
stock items are marked by bold printed order numbers. 4 - 14 pcb keyswitches 4 racon racon short-travel keyswitches racon 12 v with vertical adapter technical data dimensions length 14.5 mm width 13.6 mm overall height 5 mm mechanical design mounting soldering terminals solder terminal tin-plated contact system snap-action contact contact arrangement 1 no contact materials au illumination no mechanical characteristics operating force 3.6 +/-0.7 n switching travel 0.61 +/-0.1 mm robustness min. 100 n electrical characteristics rated voltage min. 0.02 v rated voltage max. 42 v rated current min. 0.01 ma rated current max. 100 ma rated power max. (ohmic load) 1 w contact resistance when new max. 100 m ? insulation resistance 10 9 ? bouncing time max. 5 ms other specifications ambient temp. operating min. -40 c ambient temp. operating max. +80 c storage temperature min. -50 c storage temperature max. (product) +85 c storage temperature max. (rail) +85 c resistance to constant environment according to iec 600 68-2-3 and 2-30 resistance at variable environment according to iec 600 68-2-14 and 2-33 operating life at r t = 23 c and test force = 1,5 x rated force 1000000 solderability / solder heat resistance according to din iec 600 68-2-20 flammability of materials ul 94 hb packing in boxes 100 piece produkt code f 1 general data the racon 12 v version can be used, for example, for pc plug-in boards and for measurement and control engineering applications. the vertical mounting adapter (support element) absorbs the operating force so that the pressure on the soldered terminals is reduced. for this mounting arrangement, the keyswitch is provided with two horizontal terminals on one side.
stock items are marked by bold printed order numbers. pcb keyswitches 4 - 15 4 racon racon short-travel keyswitches racon 12 v with vertical adapter 6.60 5.00 13.50 13.60 12.70 pcb terminals contact arrangement product code packing order no. solder terminal tin-plated 1 no f 1 100 pieces per box 1.14.001.505/0000 technical data see page 4 - 14 2.20 15.00 5.00 10.00 6.00 2.10 ? 1.20 ? 1.50 0 +0.05 (3x) 8.20 14.60 6.20 switching symbols acc. to iec 617 form x (twice interrupting) drilling hole diagramm view on component side hatched areas: in this area no components and no conductor tracks typical force/travel diagram racon 12v circuit diagram racon 12v pcb footprint racon 12v
stock items are marked by bold printed order numbers. 4 - 16 pcb keyswitches 4 racon racon short-travel keyswitches racon 12 i technical data general information colour of lens see order block recommended key grid 15.24 x 15.24 mm key grid max. 12.5 x 12.5 mm dimensions length 11.35 mm width 11.35 mm overall height 9.7 mm mechanical design mounting soldering terminals pcb terminals contact system snap-action contact contact arrangement 1 no contact materials au illumination fully illuminated 2 leds led colour see order block led type standard 2 mm mechanical characteristics operating force 3.3 +/-0.6 n switching travel 0.34 +/-0.1 mm robustness min. 100 n electrical characteristics rated voltage min. 0.02 v rated voltage max. 42 v rated current min. 0.01 ma rated current max. 100 ma rated power max. (ohmic load) 1 w contact resistance when new max. 100 m ? dielectric strength ac min. 750 v insulation resistance 10 9 ? bouncing time max. 5 ms other specifications ambient temp. operating min. -40 c ambient temp. operating max. +80 c resistance to constant environment according to iec 600 68-2-3 and 2-30 resistance at variable environment according to iec 600 68-2-14 and 2-33 operating life at r t = 23 c and test force = 1,5 x rated force 1000000 solderability / solder heat resistance according to iec 600 68-2-20 flammability of materials ul 94 hb packing in tubes 45 piece electrical characteristics of led led rated current max. i f at 25c red/green: 30, yellow: 50 ma led current reduction beginning with 50 degree c red: 0.5 ma/grad c, yellow0.8 ma/grad c led wavelength typ. red 639, green 510-535, yellow 590 led forward voltage u f at 20 ma red: 1.8 v/20 ma, yellow: 1.9 v/20 ma led breakdown voltage u r at 25c min. 5 v/0.1 ma general data application note low-profile keyboards with racon 12 i components should be designed with a grid spacing of 15.24 mm. with this grid, frame webs remain free between the individual keys. the overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlays. if our rk 90 system design is used, we recommend the 9 x 9 mm keycaps.
racon short-travel keyswitches pcb keyswitches 4 - 17 4 racon 8.50 8.90 4.50 1.00 (8x) + 7.60 + - - led switching symbols acc. to iec 60 617 form x (twice interrupting) explanation ? recommended area embossing 0.35 mm at glue spacer thickness of 0.15 mm 8.50 7. 6 0 8.90 1.00 4.50 15.24 15.24 15.24 9.2 0.1 12.00 1 7. 6 0 8.50 12.50 8.90 1.00 4.50 12.50 9.2 0.1 1 typical force/travel diagramm racon 12i circuit diagram racon 12i racon 12i flat data entry system with metal webs led hole patterns racon 12i smallest grid view on component side view on component side
stock items are marked by bold printed order numbers. 4 - 18 pcb keyswitches 4 racon racon short-travel keyswitches racon 12 i, solder terminals for pcb illuminated area lens red terminals contact arrangement recommended key grid illumination colour of lens led colour order no. pcb terminals 1 no 15.24 x 15.24 mm fully illuminated 2 red red 1.14.001.551/0000 pcb terminals 1 no 15.24 x 15.24 mm fully illuminated 2 green green 1.14.001.552/0000 pcb terminals 1 no 15.24 x 15.24 mm fully illuminated 2 yellow yellow 1.14.001.553/0000 pcb terminals 1 no 15.24 x 15.24 mm fully illuminated 2 orange yellow 1.14.001.554/0000 technical data see page 4 - 16
stock items are marked by bold printed order numbers. racon short-travel keyswitches 4 - 20 pcb keyswitches 4 racon racon special accessories plunger for membrane data entry system ? 9.00 min. 12.00 1 2 3 figured plunger ? 8.00 min. 6.50 0.15 0.50 in. 4.50 metal web min. 3.00 length overall height order no. complete width diameter 8 mm 6.5 mm 5.46.167.301/0209 8 mm 7 mm 5.46.167.090/0209 8 mm 9.7 mm 5.46.167.091/0209 8 mm 12.5 mm 5.46.167.092/0209 11.5 mm 6.5 mm 5.46.167.227/0209 11.5 mm 7 mm 5.46.167.042/0209 11.5 mm 9.7 mm 5.46.167.043/0209 11.5 mm 12.5 mm 5.46.167.044/0209 14.5 mm 6.5 mm 5.46.168.227/0209 14.5 mm 7 mm 5.46.168.042/0209 14.5 mm 9.7 mm 5.46.168.043/0209 14.5 mm 12.5 mm 5.46.168.044/0209 19 mm 6.5 mm 5.46.169.227/0209 19 mm 7 mm 5.46.169.042/0209 19 mm 9.7 mm 5.46.169.043/0209
racon short-travel keyswitches stock items are marked by bold printed order numbers. pcb keyswitches 4 - 21 4 racon 19 mm 12.5 mm 5.46.169.044/0209 front panel cut-out = plunger diameter + 1 mm. length overall height order no. complete width diameter square plunger for membrane data entry system min. 7? .00 ? 0.1? 5? 0.50? m ?in. 4.50? min. 1? 9.05? 15?.?0?0? min. 3.00? 1? 4.00 ? 1? 2? 3? web plunger length overall height order no. complete width diameter 14 mm 14 mm 7 mm 5.46.001.057/0209 14 mm 14 mm 9.7 mm 5.46.001.058/0209 14 mm 14 mm 12.5 mm 5.46.001.059/0209 front panel cut-out = 15 mm. legend: 1. overall height racon + plunger 2. recommended area embossing 0.35 mm at an adhesive layer thickness of 0.15 mm 3. front panel cut-out = plunger diameter + 1 mm circumferential clearance

▲Up To Search▲

Price & Availability of 114001505-0000

	To Download 114001505-0000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .